PCB board size: 35mm*19mm/1.38*0.75inch
Voltage: 5V
Current: 300mA
Frequency: 110KHz
Power: 2W
Aperture: 5um
Holes: 740
Wire length: 80mm/3.15inch
Atomized steel sheet diameter: 16mm/0.63inch
Rubber ring diameter: 20mm/0.79inch
Rubber ring thickness: 4mm/0.16inch
Work Temperature:0℃~85℃
Work Humidity:10%~90%RH
Atomizer material: shockproof silicone ring, piezoelectric ceramic ring, stainless steel sheet
How to Use It
1.Charge it with an USB power cord.
2. Place the atomizer on a shallow surface or sponge in water. Note that the welding surface of the atomizer plate faces upwards.
3. Press the key to start it. Then Enjoy Your Soft Moist Air.
❃❃Application: Ultrasonic mist maker is a humidifier DIY kit, which is widely used in atomization equipment such as USB humidifier, perfume atomizer, aromatherapy atomizer, etc.
❃❃There are two wires, the red wire is positive and the black wire is negative. The wire is 80mm long and there are terminal blocks at the end of the wire
❃❃Feature: Low driving voltage, low power, low impedance, stable waveform, high conversion efficiency.
❃❃Fine Spray Particles: The atomization plate adopts the design of intermediate spray, 5um ultra fine spray aperture and 740 ultra dense spray aperture. Spray particles are fine and do not wet the desktop.
❃❃
